Specification: (Sforzato)  

System:

two-way,closed_enclosure

Mid-woofer:

1x145mm

Tweeter:

1x25mm

Crossover:

1900Hz

Butterworth

12db/okt.electr.

24db/okt.acust.

Impedance:

8ohm

Power_handling: 80W
Dimension: 400x250x330mm
Weight: 28kg(without_support)

 

Loudspeaker Sforzato is designed as two-way system with closed enclosure. At design not only sound quality was of importance but also appearance and conception of loudspeaker cabinet and support NN1 as a whole. In set there is used middle bass speaker with dia 145mm and paper membrane painted with special dispersion paint which is dashed in a special way. This measure should avoid possible transmission of vibrations. There is a tweeter with a  25mm silk dome. Both speakers are fixed to enclosure in a special way developed by VOBA acoustic. This way eliminates transmission of resonance from speaker to enclosure and back.

 This solution enables for both speakers optimal working condition and positive effect in whole frequency spectrum was proved by many listening tests. All edges are rounded. This eliminates eventual sound diffraction and sound reflection from front side. Loudspeaker cabinet is made from MDF and natural massive wood painted and stained with quality Italien paints in tint which was developed especially for this model.

For construction of inside part of enclosure a sandwich system specially designed and by many tests proved was used. System consists from three parts with total thickness 30mm and it compensates acoustic pressures and feed back originated inside the system. To prevent origin of standing sound wave and to set right mechanical effectivity there is inside of cabinet special polyurethane substance. Front side of the cabinet is made from sandwich consisting from five parts with total thickness 40mm. Back side of baffle is made in the same way. Front layer of sandwich is from special material GLASSBOARD (6mm thick) which has got optimal reflective features. Back side of baffle is made in similar way where a pair of gilded terminals is located enabling connection in all common ways.

Frequency filter is fitted with top quality components e.g. (wire spools with air core, MKP condensers, top quality wires etc.) Wiring among all parts of passive filter are made without using printed circuit. Loudspeaker system Sforzato is recommended to be placed on support NN1.

middle_one1.jpg (19811 bytes) sforzato_stand.jpg (15804 bytes)
middle_one2.jpg (18844 bytes)